Avermedia AVerAI EN713-AAE9, Manual

Page: 24 / 34

4.0 Installation
5.0 Software
6.0 Force Recovery Mode
1. Check and ensu re all the external system power supplies are turned off.
2. Install the necessary cables for the application. The cables can include the following
ones. For the additional information of these mentioned cables, please refer to 8.0
Accessory Drawings in this manual.
l
Power cable to the input power connector (J13), DC 54V IN.
l
HDMI video display cable to HDMI video output connector (J10), HDMI OUT.
l
Mouse and keyboard cables to USB connectors (J9), USB 3.0.
3. Connect the power cable to the power adapter.
4. Turn on the power adapter. (Please be reminded NOT to power on the system by
plugging in the live power.)
For L4T (Linux for Tegra) BSP support and the other software support associated with NVIDIA ®
Jetson Nano
TM
module, please click the link here
to contact our technical support function.
OTG/USB 3.1 port (J11) of EN713-AAE9-1PC can be used to re-program
NVIDIA ® Jetson
Nano
TM
module by using the other
host system running NVIDIA Jetpack
TM
, as the procedure
described below.
1.
Power off the system. Ensure the system power must be completely OFF, instead of
staying in the suspend mode or the sleep mode.
2.
Connect a USB cable from OTG USB port to the other host system which will be used
to re-program the new system file into
NVIDIA ® Jetson Nano
TM
module
.
3.
Press and hold down Recovery butto n (SW8) and then power on BOX PC.
4.
After three seconds, release Recovery button.
5. NVIDIA
®
Jetson Nano
TM
module
will show up on the USB list of the host system as a
new NVIDIA target device.
24