Avermedia AVerAI EN713-AAE9, Manual

Page: 15 / 34

2.5 Connector Summary
Designation Description
2.6 Switch Summary
Designation Description
J1 RJ45 1 0/100Mb 4-port Ethernet connector with POE support
J2 RJ45 1 0/100Mb 4-port Ethernet connector with POE support
J3 RJ45 1G b single-port Ethernet connector
J5 260-pin SODIMM connector for NVIDIA ® Jetson Nano
TM
module
J6 SATA power wafer
J7 Fan wafer
J8 Mic and speaker connector
J9 USB 3.1 Gen 1 2-port connector with 900mA x2
J10 HDMI video output connector
J11 OTG/USB micro-type connector
J12 RS485 connector
J13 54VDC power jack
J14 20-pin header UART console for debug, I2C, GPIO
J16 Mini card connector for USB only
J17 SATA connector
BT1 RTC battery connector
The above listed connectors are located on the carrier board, and most of them are accessible from the front panel and
the rear panel of Box PC EN713-AAE9-1PC, where the names of the associated connectors are printed.
SW8 Recovery button
SW9 Power on button
SW10 4-pin DIP switch with four sets of setting as defi ned in Section 3.20.
The above listed switches are located on the carrier board. SW8 and SW9 are accessible from the front panel and the
rear panel of Box PC EN713-AAE9-1PC, where the names of Recovery and Power are printed.
15