FXT 5000 Series Installation Guide
7.2.8 Rear Panel: Data Port LEDs ( e2a, e2b, e3a, e3b)
This table shows status information for the dual rate 25GbE/10GbE ports on the FXT 5850 and for the 10GbE ports
on the other FXT 5000 Series models. Note that the link speed LED shows solid yellow for a low-speed connection
and solid green for the maximum speed, but that the actual speed varies depending on the model.
LED Name
State
Meaning
Action (if applicable)
Activity/Link
LED
Unlit
Port is not linked
Check networking cables and associated
Ethernet switch ports. Replace or reconnect
cable as required and/or enable the switch
port.
Blinking
green
Activity on port
N/A
Solid green
Adapter is linked to the LAN
N/A
Link Speed
LED
Unlit
Port is not linked
Check networking cables and associated
Ethernet switch ports. Replace or reconnect
cable as required and/or enable the switch
port.
Solid yellow
FXT 5850:
• Port is linked at the
10Gbps rate
Other FXT models:
• Port is linked at the
1Gbps rate
If this port link speed is incorrect, check
that the port on the associated Ethernet
switch is set to the desired speed. Change
the switch port speed setting if necessary.
Solid green
FXT 5850:
• Port is linked at the
25Gbps rate
Other FXT models:
• Port is linked at the
10Gbps rate
7.2. Status LEDs
35
