N
otebook User Guide
98
4. Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
+
Avoid touching the exposed components inside the system. Doing so
may damage the system.
5. Insert the connector of the memory module into the socket. Make sure
the notch of the memory module fits the nose of the socket.
Ÿ
Hold the memory module at a 30-degree angle and push its
connector into the memory socket of the notebook.
Ÿ
Press down on the edge of the memory module until the locking
tabs on both sides is locked.
6. Put the SO-DIMM door back and secure the screw on the SO-DIMM
door.
7. Turn the system over.
To remove a memory module, push the locking tabs aside from the memory
module until the module pops up. Then, remove the memory module.
7.2 Hard Disk Upgrade
This section provides the steps in upgrading the hard disk for your notebook
computer. The upgrading procedures include the following:
U
PGRADE
H
ARD
D
ISK
Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If
the volume does not fit your need or it is crashed, you can upgrade it by
replacing with new hard disk. Please do the following steps to change it.
