manualshive.com logo in svg

AVERATEC AV5110H, User Manual

Share
Download
AVERATEC AV5110H User Manual Download Page 76

N

otebook User Guide

 

76 

 

Ethernet standard. Because it is 10 times faster than Ethernet, it is often 
referred to as Fast Ethernet. 

The built-in LAN module provides a standard RJ-45 connector.  

To connect the twisted-pair cable to your LAN port: 

1.  Locate the twisted-pair cable in the accessories box in notebook 

shipping carton. Each end of the cable has a RJ-45 connector. 

2.  Connect one end of the cable into the network wall outlet or HUB. 

3.  Connect the other end of the cable into the computer RJ-45 LAN port. 

 

5.6  Using the Wireless LAN 

Wireless LAN is the major breakthrough in computer communication 
technology. It lets user connect to the LAN environment without using any 
wire to traditional RJ-45 jack. User can enjoy the wireless connection within 
the range of Access Point (AP) of LAN.  

Access Point (AP) is the wireless transmission and receiving device, it 
generally connects to the server of a LAN environment or act as a LAN hub 
with wireless connection. Access point can be set in an office environment, 
airport, major railway station, etc. that depends on the construction of each 

Summary of Contents for AV5110H


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands