manualshive.com logo in svg

AVERATEC AV5110H, User Manual

Share
Download
AVERATEC AV5110H User Manual Download Page 17

Introduction

1

 

17 

 

⇓ 

LCD display control hot-keys allows you to adjust the brightness of 
the LCD.

 

⇓ 

Simultaneous display capability for LCD and external desktop 
computer monitor.

 

• 

Status LED Indicator  

Keeps you informed of your notebook computer’s current operating 
status and power status. Description of the status icons appears in the 
latter part of this section. 

• 

Keyboard 

⇓ 

Standard QWERTY-key layout and full-sized 88 keys keyboard 
with Windows system hot-keys, embedded numeric keypad, 7 hot 
keys, inverted "T" cursor arrow keys, and separate page screen 
control keys.

 

⇓ 

Wide extra space below the keyboard panel for your wrist or palm 
to sit-on comfortably during typing.

 

• 

Easy Buttons  

There are three easy buttons used for activating wireless function and 
accessing user-defined functions instantly and easily. Description of the 
easy buttons appears in the latter part of this section. 

• 

Power On/Resume Button 

Switches the computer power on and off, or resumes whenever it is in 
Suspend mode. 

Summary of Contents for AV5110H


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands