AVERATEC 7100 Series User Manual Download

Page: 68 / 81

3-9

Customizing this Notebook

PC Express Card Installation

This computer provides a PC Express Card slot.

The new PC Express Card

interface is smaller and faster than the PC (PCMCIA) Card interface.

The PC

Express Card technology takes advantage of the scalable, high-bandwidth serial

PCI Express and USB 2.0 interfaces.

The following instructions provide you with a basic installation for the PC Express

Card, including how to install and remove it.

For more information, please refer

to the manual of your PC Express Card.

Installing the PC Express Card

Locate the PC Express Card slot on your Notebook.

If there is a dummy

card in the slot, remove it first.

Insert the PC Express Card into the slot (usually with its label facing up)

and push it until it is firmly in place.

Removing the PC Express Card

Press the Eject Button to make it stretch out.

Pull the Express card out of the slot.

Summary of Contents for 7100 Series


















































































Search results

Summary of Contents for 7100 Series

Reviews:

Related manuals for 7100 Series

Brands by name

Popular brands

AVERATEC 7100 Series, User Manual

Search results

Summary of Contents for 7100 Series

Reviews:

Related manuals for 7100 Series

Brands by name

Popular brands