AVERATEC 7100 Series User Manual Download Page 30

Page: 30 / 81

2-11

Getting Started











Right-side View

Express Card Slot

The computer provides an Express Card slot.

The new Express

Card interface is smaller and faster than the PC Card (PCMCIA)

interface.

The Express Card technology takes advantage of the

scalable, high-bandwidth serial PCI Express and USB 2.0 interfaces.

PC Card Slot (PCMCIA)

The computer provides a PC card slot to support one Type-II PC card for

expansion functions, such as LAN/WLAN, WWAN/WMAX, EVDO/Edge,

memory card, etc.

USB Port

The USB 2.0 port allows you to connect USB-interface peripheral devices,

such as external mouse, keyboard, portable hard disk dri, printer and more.

S-Video Connector

By using a Super VHS (S -Video) cable, this connector allows you to

connect a television (NTSC/PAL system) to use as a computer display.

Summary of Contents for 7100 Series


















































































Search results

Summary of Contents for 7100 Series

Reviews:

Related manuals for 7100 Series

Brands by name

Popular brands

AVERATEC 7100 Series, User Manual

Search results

Summary of Contents for 7100 Series

Reviews:

Related manuals for 7100 Series

Brands by name

Popular brands