3-4
Customizing this Notebook
Connecting a WebCam
You can connect a WebCam to your Notebook through the USB port:
1.
Turn on the Notebook and install the WebCam driver.
2.
Connect your WebCam to the Notebook.
3.
The Notebook may auto detect your WebCam driver and enable the
WebCam function.
If there is no detection of you WebCam you can
manually enable the WebCam by going to
Start Menu
Control Panel
Add Hardware
to add the new device.
Connecting a Printer
If your printer has a USB interface, you can then use the USB port on the
Notebook to connect the printer.
The following instruction describes the
general procedure to connect a printer:
1.
Turn off the Notebook.
2.
Connect one end of the printer cable to the Notebook’s USB port and the
other end to the printer.
3.
Connect the power cord and turn on the printer.
4.
Turn on the Notebook and the system will detect the new device.
Install
the required driver.
For further instructions, please refer to your printer’s manual.
