18
PUBLIC IP CONFIGURATION (OUTSIDE OF FIREWALL):
Your EVC system is connecting directly to the internet. Select the IP mode.
Obtain IP address by DHCP:
Configure the system to automatically obtain an IP address from the
DHCP server. The EVC system will automatically get a IP address which assigned by your DHCP
server on LAN. The IP address and related information will display. Click
OK
to accept the setting.
Static IP:
Configure the system to use the assigned IP address. Select this when the public IP
address is available
.
Enter the following information and click
Apply
to save the settings. To go to next step, click
Next
and click
Back
to go back to
Network Setting
page.
1. Your IP Address is:
Enter your IP address
manually.
2. Subnet Mask:
Enter the subnet mask address
when the system does not automatically
obtain the subnet mask
3. Default Gateway:
A gateway is a network
point that acts as an entrance to another
network. Enter the gateway address when the
system does not automatically obtain the
gateway.
4. Preferred DNS Server:
Domain Name
System (DNS) servers convert human friendly
names (for example: www.example.com) to IP
addresses (218.77.272.166) that let machines
be found on the network. The preferred DNS
server is the one your computer asks first. The
alternate is a backup. Enter the Preferred and
Alternated DNS Server address.
5. Alternate DNS Server:
Enter another Domain
Name server for second choice
.
IPv6:
IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4 for
some time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by colons.
Summary of Contents for EVC100
Page 1: ...EVC150 EVC130P EVC100 EVC130 User s Manual...
Page 4: ...COPYRIGHT 103 Trademarks 103 Disclaimer 103...
Page 42: ...38 ONLINE PHONEBOOK View the phonebooks are downloaded from LDAP server...
Page 103: ...99 7 Unclick the checkbox Display intranet sites in Compatibility View and then click Close...
