AVer EVC100, User Manual

Page: 101 / 107

97
- Check to see if your cable is connecting correctly.
- Make sure your system and display are well-connected and then reboot your system. (Your
display should be switched on before you reboot your system.)
- Press
“Dual” button on remote controller (User needs to keep pressing until OSD menu is
shown).
4. Why the content sharing is not 720p when the source is 720p?
- Aver EVC systems support up to 720p content sharing and default value is XGA. For a
16:9(720P) video display, you have to configure it by manually.
5.
Why can’t I see the UI configuration screen after connecting the VGA cable and powering on Aver
EVC systems upon screen saver mode?
- Please plug and unplug the VGA connector again to re-connection the VGA cable.
Network
1. The LAN connection is fail.
- Make sure you have changed your default IP address. The default IP address is 192. 168.0.1,
in order not to conflict with other devices in the same LAN, please change your IP address at
the start.
2. Cannot open WebTool by IE9 and IE10.
3. Click (General Setting icon) in IE.
4.
Select “F12 developer tools”.