
4
GETTING FAMILIAR WITH THE AVER EMC1000
EMC1000 is a 1U rack mount appliance.
FRONT PANEL
Name
Function
(1) LED Indicator
Power, HD (harddisk), NIC1 (LAN1), NIC2 (LAN2) and overheat status
(2) POWER Button
Press this button to turn on/off the system. Power off shuts down the
main system power, keep standby power alive. Before service the
system, shutdown the system and pull the power plug off.
(3) RESET Button
Reboot the system.
BACK PANEL
Name
Function
(1) POWER Port
Connect the power supply cord to a suitable power outlet.
(2) LAN2 Port
(3) Ethernet Port PCI-E
Run the included gray CAT6 cable from (2) to (3).
(4) LAN1 port
Run the included orange cross cable to a PC to start your initial
configuration.
(5) serial port
In case orange cross cable not working properly, use serial port to
configure the system.
INSTALLATION
Summary of Contents for EMC1000
Page 1: ...www aver com EMC1000 User s Manual ...
Page 5: ......
Page 14: ...12 SIP CONFIGURATION SIP parameters are in SIP CONFIGURATION Click to start editing ...
Page 28: ...26 ...