www.avenview.com
9
1.10
C. Full Package Installation
1.
Place the Transmitter unit in close proximity to the HDMI source device.
2.
Connect the HDMI Switch to the Transmitter
3.
Connect the HDMI source device to HDMI IN port of the Transmitter by using a standard HDMI cable.
4.
Connect the IR Extension cable to the IR port on the HDMI Switch.
5.
Place the other end of the IR Extension cable near the IR port on the HDMI source device.
6.
Place the Receiver unit near the HDMI display/projector, Connect the HDMI display /projector to the
HDMI Output port of the Receiver unit 5.
7.
Connect the power adapter (included) to the DC IN ports of the Transmitter and Receiver.
Once these steps have been completed the Extender is ready to use, simply power on all devices to begin
operation.
