background image

www.avenview.com 

10 

 

1.11

 

D. Standard Package Installation 

 

 

1.

 

Place the Stick Transmitter unit in close proximity to the HDMI source device. 

2.

 

Connect the HDMI source device to HDMI IN port of the Transmitter by using a standard HDMI cable. 

3.

 

Place the Receiver unit near your HDMI display/projector, Connect the HDMI display /projector to the 
HDMI Output port of the Receiver unit 5.   

4.

 

Connect the power adapter (included) to the DC IN ports of the Transmitter and Receiver. 

Once these steps have been completed the Extender is ready to use, simply power on all devices to begin 
operation. 

 

1.12

 

Operation 

 

Once all equipment is turned on, the Extender will initiate a Wireless link successful connection of the link will 
be shown by the blue Wireless Link LED on Both the Transmitter and Receiver. Once this has been completed 
the blue Link Led will be lit on both units. 

Whilst the Extender is creating the video link it is normal for the HDMI display to flicker ON and OFF. With 
both the wireless and video Link LED illuminated the Extender is ready to transmit video. If your HDMI source 
and display devices support CEC then the source device can simply be controlled using the display remote 
control. 

IR Extender Function 

If the HDMI source and display devices support CEC, then it is possible to control the source device remotely 
using the IR Extender function. Ensure that the IR Eye on the Receiver unit is positioned to receive IR 
Commands. 

1.

 

Connect the supplied IR Extender Cable to the IR Input on the Transmitter unit 

2.

 

Position the IR Flasher near the IR Port of the source device 
 

Summary of Contents for W-HDM3D5G-30M
















Reviews: