www.avenview.com
Page 4
STEP 1
: Connect the Source to the Transmitter Unit (Tx)
Connect a source output to the W-hDM3D-S-100 (transmitter) using a DVI to hDMI cable. For non-standard source signals,
use the CW-hDMDVI-100 scaler/converter between the source and the Tx.
Step 2
: Add the CW-HDMDVI-100 Scaler/Converter to the Transmitter
hElPS NoN-STANDARD VIDEo SIGNAlS BECoME WIRElESS CoMPATIBlE
Some medical device manufacturers prefer not to use the normal standardized video timings for hD image resolutions. If
this is the case with your intended video source, then the W-hDM3D-S-100 system will be unable to successfully transmit a
video signal. In this situation, the CW-hDMDVI-100 scaler/converter can be used to regulate the signal from the source into a
standardized video signal that the W-hDM3D-S-100 system can understand.
Standard
Incoming
Proprietary
Signal
Timing
