Avenview SW-HDM3D-C5-8X8 User Manual Download Page 2

Page: 2 / 20

www.avenview.com

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof,

in any form, without the express written permission of Avenview Inc. is strictly prohibited.

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1

Important Safeguards ............................................................................................................ 3

1.2

Safety Instructions ................................................................................................................. 3

1.3

Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4

Introduction ........................................................................................................................... 4

1.5

Package Contents ................................................................................................................... 6

1.6

Before Installation.................................................................................................................. 6

1.7

Panel Description ................................................................................................................... 7

1.7.1 SW-HDM3D-C5-8X8 Front Panel ........................................................................................... 7

1.7.2 SW-HDM3D-C5-8X8 Rear Panel ............................................................................................ 7

1.7.3 HDM3D-C5SW-R .................................................................................................................... 8

1.7.4 Dip Switch for EDID & Audio Settings (SW1 – SW8).............................................................. 9

1.7.5 SW Main Dip Switch for Firmware Update ......................................................................... 10

1.8

IR Control Patch ................................................................................................................... 11

1.9

Installation (SW-HDM3D-C5-8X8) ........................................................................................ 12

1.10

Operation and IR Control ..................................................................................................... 13

1.10.1 Source Side ........................................................................................................................ 13

1.10.2 Display Side ....................................................................................................................... 14

1.11

RS232 Serial Port Control ..................................................................................................... 15

1.11.1RS232 Commands .............................................................................................................. 17

Section 2: Specifications ....................................................................................................................... 18

Summary of Contents for SW-HDM3D-C5-8X8





















Search results

Summary of Contents for SW-HDM3D-C5-8X8

Reviews:

Related manuals for SW-HDM3D-C5-8X8

Brands by name

Popular brands

Avenview SW-HDM3D-C5-8X8, User Manual

Search results

Summary of Contents for SW-HDM3D-C5-8X8

Reviews:

Related manuals for SW-HDM3D-C5-8X8

Brands by name

Popular brands