www.avenview.com
8
1.7.3 HDM3D-C5SW-R
1.
IR INPUT:
Plug in IR receiver.
2.
+5V DC:
Spare power jack for over 60m
transmission when the RX may need external
power to work.
3.
HDMI SIGNAL:
Plug in the CAT5 connected to the
respective
A/V SIGNAL
port on the
SW-HDM3D-C5-8X8
4.
IR SIGNAL:
Plug in the CAT5 connected to the
respective
CHANNEL CONTROL
port on the
SW-HDM3D-C5-8X8
5.
INPUT :
Display the current showing HDMI source
channel
6.
INPUT SELECT:
Push button for switching input
source channel in sequential order
7.
EQ Level:
Adjust the 8-level equalization control
to the received HDMI signals. The HDMI signal
level varies from 0 (strongest) to 7 (weakest) for
respective transmission length from longest
possible range to short distance. Please adjust the
signal level from 7 to 0 and stop turning the
rotary switch whenever the audio/video is playing
normally. Inappropriate signal level setting may
cause overpowering issue that would shorten the
product life significantly!
8.
HDMI OUT:
Connect to HDTV with a HDMI cable
Summary of Contents for SW-HDM3D-C5-8X8
Page 5: ...www avenview com 5 ...
