Page|5
www.avenview.com
2.
INTRODUCTION
Avenview
SC-HBT-HDMA-8X4
Presentation Scaler allows the user to switch and scale HDMI/
HDBaseT/PC/Composite Video signals from any one of its eight inputs and simultaneously display it on any of
its HMDI or HDBaseT outputs. The unit has and HDMI bypass output, allowing local monitoring of any of the
HDMI or HDBaseT inputs, and features full 5play™ convergence for easy integration of compatible
transmitters and receivers. Bonus feature to control via IR remote control, RS-232, IP/Telnet and WebGUI,
and the system status Front panel LCD
Features
-
HDMI, HDCP and DVI compliant
;
-
Full 5Play™ convergence: Video, Audio, LAN serving, Bi-directional Power over Ethernet (PoE) AND Control (IR &
RS-232 bypass)
;
-
Supports High-definition Audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
transmission (32-192kHz sample rate)
;
-
Supports distances of up to 100 meters over industry standard CAT5e/6/7 cables
;
-
Supports scaling of any input signals to a wide range of HDTV and PC output resolutions up to 1080p and WUXGA (RB)
-
Digital to Analog and Analog to Digital Audio conversion (DAC/ADC)
;
-
Simultaneous video output of the selected source through the HDBaseT and HDMI outputs and audio output through the
digital coaxial and analog L/R outputs
;
-
Features four HDMI inputs with corresponding L/R audio inputs (3.5mm mini-jack), two HDBaseT CAT5e/6/7 inputs, PC
(15-pin D-sub) with L/R audio (3.5mm mini-jack) and Composite Video and L/R audio (3 RCA)
;
-
Features two HDMI outputs, one HDBaseT CAT5e/6/7 output, one Digital Coaxial audio output and one L/R audio
3.5mm mini-jack output
;
-
Supports switchable HDMI bypass allowing local monitoring of any of the HDMI or HDBaseT inputs
;
Supports Power over Ethernet (PoE) on the CAT5e/6/7 output to a compatible Receiver
;
-
Supports control via IR, Remote control, RS-232, Telnet, Web GUI and on-panel controls
;
-
Supports HDBaseT LAN serving function to compatible Receivers
;
-
Supports control via IR, Remote control, RS-232 and on-panel controls
.
This
model
was tested with CAT6A (625MHz), 4-Pair, U/UTP-Unshielded cable, so if using
Category cables of another
type, results may vary.
NOTE:
*
The PoE function is designed for powering compatible Receiver units only.
*
The non-PoE Receivers has to be powered with a power supply.
*
Receivers (Rx) from different manufactures would not be compatible.
*
Displaying HDMI 4Kx2K resolution would require the standard 4Kx2K HDMI cable and display for accurate
results.
