www.avenview.com
9
DIP SWITCH (Straight or Crossover Mode)
2.4
Installation
To setup Avenview HDM3D-C5IR-SET follow these steps for connecting to a device:
1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDM3D-C5IR-S).
2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDM3D-C5IR-R.
3. Connect your CAT-5E/6 LAN cable between the transmitting and receiving units.
4. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the receiving unit HDM3D-C5IR-R.
6. Plug in 5V DC power cord to the power jack of the transmitting unit HDM3D-C5IR-S.
DIP Switch
Position
Description
TX & RX
ON [
]
TxD: The 2
nd
pin of RS-232, which is in charge
of (receiving data )
RxD: The 3
rd
pin of RS-232, which is in charge
of (sending data )
OFF [
]
TxD: The 3
rd
pin of RS-232, which is in charge
of (receiving data )
RxD: The 2
nd
pin of RS-232, which is in charge
of (sending data )
