www.avenview.com
10
2.5
Auto EDID Learning
To learn EDID from the monitor/TV following these steps
1.
Connect HDM3D-C5IR-R and the desired display through a HDMI cable and then connect
HDM3D-C5IR-S and the video source through a HDMI cable as well.
2.
Turn on both the HDM3D-C5IR-S and the HDM3D-C5IR-R.
3.
Set the Mode of HDM3D-C5IR-S to “H,” and wait for 3-5 seconds.
4.
The device could learn the EDID of the desired display via HDM3D-C5IR-R after the step “3,”and enjoy
the experience; the users DO NOT need to power cycle again or even twice while plugging on
different displays.
Section 3: General Troubleshooting
Problem
Possible Solution
No Image
Check if connection to the source and the display are correct.
Ensure that display device supports 480p, 720p and 1080p resolution
Screen Defects
Appear
This product supports up to 1080p (1920x1200) resolution.
Check the DVI and HDMI connection
If outputting from a PC. Check the maximum resolution range of the
graphics card.
When adjusting the
EQ level
on the receiver unit. Please dial the rotary control switch from MIN to
MAX and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate
EQ level setting may cause overpowering issue that would shorten the product life significantly!
