www.avenview.com
8
FRONT PANEL & REAR PANEL (Receiver- HDM3D-C5IR-R)
1.
Signal Level:
Adjust the Min/Max
equalization control to the received HDMI
signals
5. IR BLASTER:
Infrared 3.5mm socket for plugging in
the extension cable of IR blaster
2. DIP SWITCH
: Setup the RS-232 mode for serial
communication channel
6. RS-232:
Connect to PC Serial Port with a D-SUB-9
male-male cable here
3. HDMI OUT:
Connects to a HDMI display with a
HDMI male-male cable
7. +5V DC:
Connect to 5V DC power supply.
4. IR RECEIVER:
Infrared 3.5mm socket for plugging
in the extension cable of IR receiver
8. HDMI SIGANL IN:
Plug in a Cat-5E/6 cable that
needs to be linked to the receiving unit
SIGNAL LEVEL on the HDM3D-C5IR-R (Receiver)
*SIGNAL LEVEL:
Adjust the Min/Max equalization control to the received HDMI signals. The HDMI signal level varies from
MIN (weakest) and Max (strongest) for respective transmission length from longest possible range to
short distance. Please adjust the signal level from MIN to MAX and stop turning the rotary switch
whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering
issue that would shorten the product life significantly!
If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable
skew. Max stands for the strongest EQ while MIN stands for the weakest. Try adjusting the EQ from
MIN to MAX
1
2
3
4
5
6
7
8
