11
4.
PC CONFIGURATOR
Before using the Avenview PC Configurator, please ensure you download the most recent version from the product
HDM-C6MWIP4K-S Sender and HDM-C6MWIP4K-R Receiver website link /downloads PC control software. Refer
to the chart above for correct version numbers.
All devices must be in the same network segment. To verify and properly control the devices, please set a static IP on
your computer. See the instructions below on how to proceed:
The Sender and Receiver units are pre-configured with AutoIP. Upon connecting the units to a stand alone network
switch (without router attached), the units will be on IP address range at 169.254.1.1 and subnet mask 255.255.0.0.
Set your computer's IP address as 169.254.X.X and subnet mask as 255.255.0.0.
A Windows 7 PC/Laptop is used as an example to configure a static IP address.
You can connect multiple HDM-C6MWIP4K-S and the HDM-C6MWIP4K-R H.264 decoder to build a modular IP matrix.
With the PC configurator, you can configure and manage this function. For more information, see the user guide of PC
configurator on the M-Series product page available
here.
Minimum System Requirements for PC Software:
Operating System: Microsoft® Windows® XP, Windows® Vista, Windows® 7 or Windows® 8
CPU: 1.5 GHz
Memory: 1 GB of RAM
HDD: 32 GB of available hard disk space
Network: 10/100 NIC
www.avenview.com
Rev. 00 - 10/2017
Products
Versions
HDM-C6M
W
IP
4K
-S
v
3
.
1.1
HDM-C6M
W
IP
4K
-R
v
3.1.1
HDM-C6MWIP-
R
v2.1
1
.
4
HDM-C6M
W
IP
L
-R
v2.
11.4
CTRLPRO-MIP
API V1.
3
/V7.
6
.
1
(V7.
6
.0)
M-SERIES PC Console
v
8
.
0
.
9
Firmware Update Tool
v
3
.
0
.
2
Products and Versions
4.1
SETTING A STATIC IP ON YOUR COMPUTER
