3.
INSTALLATION (HDM-C6MWIP4K-SET) POINT to POINT
To setup Avenview HDM-C6MWIP4K-SET please follow these steps for connecting to a device:
1.
2.
3.
4.
5.
6.
7.
Turn off all devices including monitors / TV.
Connect an HDMI source (such as a Blu-Ray Disc player or PC) to the Encoder HDM-C6MWIP4K-S.
Connect CAT5/6 from Encoder to Decoder at the CAT5/6 port.
Connect an HDMI out from HDM-C6MWIP4K-R decoder to a Display/Monitor.
Connect Audio out to Speakers or Amplifier.
Ensure all cable connections are secure and not loose.
Plug in 12V DC power (supplied) and connect the HDM-C6MWIP4K-S and HDM-C6MWIP4K-R to power jack
respectively. Power on HDMI Source.
Power on the HDMI display.
3.1
IP MATRIX SWITCH GUIDE
8
.
NOTE:
For network setup please see the Network switch configuration guide and Network Connection guide to
acheive best results.
TX and RX Guide
Networking Switch Guide
Distribution Status
Total
Quantity
Network
Topology
Recommended Switches
Centralized
Less than or
equal to 20
TX/RX
Single Switch
Networking
Less than or
equal to 40
TX/RX
More than
40 TX/RX
Cascading
Switch
Networking
Huawei Switches for Stacking topology
Core switches uses 1000 Mbps Ethernet switches.
Extended switches use 1000 Mbps Ethernet switches
Distributed
No
requirement
www.avenview.com
8
Rev. 00 - 10/2017
Huawei
Network Switch for Video over IP applications
Switching capacity: 336 Gbit/s
Models: S5720-28X-PWR-SI-AC, S5720-28X-PWR-SI-DC
S5720-52X-PWR-SI-ACF
Hauwei
Network Switch for Video over IP applications
Switching capacity: 336 Gbit/s
Models: S5720-52X-PWR-SI-ACF
