Model Number MD-WT-ADV-24 User Guide
Page | 28 ©2018 Aventura Technologies, Inc. All rights reserved.
4
Alarm
fault
There’s an
alarm when no
people are
going through
Check the surrounding environment
or try to change the frequencies.
When the sunlight hits directly on
the infrared component, it may also
trigger an alarm.
Replace the infrared
component
Change the
installation location
to avoid the sun
5
There’s no
alarm when
people pass
with metals
Normally it is because the sensitivity
is too low. Try to increase the
sensitivity of each zone
Debug capture card
For additional Troubleshooting and Support, please contact Aventura Technologies Inc.:
Tel:
+1.631.300.4000
Fax:
+1.631.434.7000
Email:
