PACE 500 OWNER’S MANUAL
1
GETTING STARTED
The Pace 500 is operated using the control pad on the
handlebars. The control pad is located near the left-hand brake
lever.
First, turn on the power switch on the battery itself. Then press
and hold the “M” button on the control pad for 3 seconds to
power up the system. While the bike and display are powered on,
press and hold “M” for 3 seconds to turn off.
The Pace 500 E-Bike offers pedal assist. When using pedal assist,
an electric motor supplements the rider’s own effort. To use the
pedal assist, simply start pedaling, then tap the “U” or “D” arrows
to increase or decrease the amount of pedal assist. Pedal assist
will engage at speeds up to 28 MPH.
The Pace 500 E-Bike is equipped with a throttle, which is
mounted near the rider’s left thumb, to propel the bike without
pedaling. To use the throttle, start pedaling then apply the throttle.
Once the bike is moving on throttle power, you can stop pedaling
entirely and use your thumb to control the speed of the bike. The
throttle can propel you at speeds up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.
Summary of Contents for PACE 500
Page 1: ...PACE 500 OWNER S MANUAL ...
Page 15: ...PACE 500 OWNER S MANUAL 11 NOTES ...
Page 16: ...WWW AVENTON COM ...