aventon PACE 500, Owner'S Manual

Page: 14 / 16

PACE 500 OWNER’S MANUAL 10
24
Motor Hall Sensor
Error
Check the motor hall sensor wire might
be disconnected or damaged, reconnect
the motor cable.
25
Brake
Error
The Pace 500 uses special brake levers
that stop the motor when you apply
the brakes - built in “magnetic reed
switches” disengage the motor’s power
when the lever is squeezed. If the lever
is damaged (for example, following a
crash), it might need to be replaced.
38
Battery Voltage
Error
The battery is not supplying the required
voltage to power the display and motor.
Use the display to view the real-time
voltage being output from the battery. It
can also be checked using a volt meter. If
the battery is old and has been charged
/ discharged many times, it may need to
be replaced. This error could also appear
if you install the wrong battery on your
Pace 500.