aventon PACE 500, Owner'S Manual

Page: 13 / 16

PACE 500 OWNER’S MANUAL 9
ERROR CODES AND TROUBLESHOOTING
In the event of a problem with the electrical components of your
bike, the display will show an error code. Compare the code with
this list below and
HOW TO RESOLVE:
CODE ERROR HOW TO RESOLVE
30
Communication
Error
Poor connection between the controller
and the display, check all cable
connections.
21
Current
Error
Check the cable that connects the
rear hub motor to the rest of the
system. Make sure it is free from grit or
contaminants and is firmly connected.
22
Throttle
Error
When you press and release the throttle,
it should return to the original position.
Remove any obstructions. Check the
throttle and throttle cable for damage,
such as a cut or frayed cable.
23
Motor Phase
Error
Check the cable that connects the rear
hub motor to the rest of the system
and make sure it is free from grit or
contaminants and is firmly connected.
This error might appear if you don’t
reconnect the cable after removing the
rear wheel (for example, after changing
a flat tire, or transporting your bike in the
trunk of a car). At least one of the motor
phase wires has been damaged or is
temporarily disconnected.