H-4 CONTROLAIR
®
VALVE
Service Information
SM-800.6516
The user of these devices must conform to all applicable
electrical, mechanical, piping and other codes in the
installation, operation or repair of these devices.
INSTALLATION!
Do not attempt to install, operate or
repair these devices without proper training in the
technique of working on pneumatic or hydraulic systems
and devices, unless under trained supervision.
Compressed air and hydraulic systems contain high
levels of stored energy. Do not attempt to connect,
disconnect or repair these products when a system is
under pressure. Always exhaust or drain the pressure
from a system before performing any service work.
Failure to do so can result in serious personal injury.
MOUNTING!
Devices should be mounted and
positioned in such a manner that they cannot be
accidentally operated.
WARNING: INSTALLATION AND
MOUNTING
DESCRIPTION OF MODELS
The H-4 Type CONTROLAIR Valves are knob
operated 3-way pressure graduating valves. The knob
actuates the pressure graduating portion to increase,
decrease or maintain graduated air pressure to a
separate delivery line.
In knob “release” position the delivery line is connected
to exhaust. Knob rotation from release position
actuates the graduating portion to deliver graduated
pressure to a delivery line according to the value of
control spring being used. The knob is self holding in
all positions.
The H-4 CONTROLAIR Valve is available with either
clockwise rotation or counterclockwise rotation of the
knob increasing pressure.
Table of Contents
Page
Description of Models .................................. 1
Technical Data .............................................. 2
Installation ..................................................... 2
Maintenance and Repair ............................... 2
Outline Dimensions ....................................... 3
Description of Operation................................ 4
Symbol .......................................................... 4
Diagrammatic View ....................................... 4
Identity Schedule ........................................... 5
Exploded Views ............................................. 6
Parts List ....................................................... 7
Repair Kit List ................................................ 8
Maintenance and Repair ............................... 9
Testing:
Function ................................................. 10
Pressure Range ..................................... 10
Leakage ................................................. 10
Flow Capacity ........................................ 10
Response ............................................... 10
Test Set-up ............................................ 10
Test Diagram ................................................. 11
Warnings and Warranties .............................. 12
