Installation
2
Mark the place on the glass
door for the installation, and
then paste the base board
on it.
a
Loose the screws on the back side
of the lock, disconnect the
cable on the lock, and then insert
the lock into the base board
b
Connect the cable with the back
plate of the lock, and then fasten
the lock
c
Install the battery and try to
unlock the lock to make sure
the installation is correct.
d
For the strike plate, make the
place on the glass door according
to the place of the lock, and then
paste and base board on it
e
Insert the strike plate into the
base board and finish.
f
