4x4 HDMI 2.0 Matrix Kit
30
7.5 RS232 Control
Click
RS232
to enter the below section to send RS232 commands to control remote
third-party device.
Operation:
1) Select the HDBaseT port which is connected with HDBaseT receiver which must
have third-party device attached.
2) Set the baud rate.
3) Typing the commands in the box to control the selected remote third-party device
which is connected to HDBaseT receiver. If click the
Hex
, the RS232 commands
can be typed with hexadecimal value.
4) Click
Send
to transmit RS232 command to the selected HDBaseT port.
