4x4 HDMI 2.0 Matrix Kit
15
6. IR Control
6.1 IR Remote Control
Connect an IR receiver to the IR EYE port, the matrix can be controlled by using the
following IR remote.
①
Enter/exit standby mode.
②
Blinking red when a button is pressed.
③
Video source selection buttons.
④
Output channel selection buttons.
⑤
Menu buttons:
⚫
ALL: Select all inputs and outputs.
⚫
EDID: Enable input port to manually capture and
learn the EDID data of outputs devices.
⚫
CLEAR: Cancel the current commands, if ENTER
has not been pressed.
⚫
ENTER: Confirm the desired command or press and
hold for 3 seconds to enter into the inquiry mode.
Note: The buttons on the remote control directly
correspond to the buttons on the front panel and perform
the same functions.
