User manual
Drive unit DAE-01 CL
8
4. Operation
4.1
The control panel
On Off
33
45
Display
4.2
Switch on the drive unit („On“)
►
By pressing the [On Off] key for approx. 3 s, the drive unit changes
from standby mode „Off“ to operating mode „On“.
Modus
►
Display
Operating mode
„On“
for approx. 3 s
►
By pressing the [On Off] key for approx. 6 s, the drive unit changes
from activated motion care function to operating mode „On“.
Modus
►
Display
Operating mode
„On“
for approx. 6 s
4.3
Switch off the drive unit („Off)“
►
By pressing the [On Off] key for approx. 3 s, the drive unit changes
from operating mode „On“ respectively from activated Motion Care
function to the standby mode „Off“.
Modus
►
Display
„Off“
standby mode
more than 3 s
after 10 s
4.4
Activating Motion Care function
►
By pressing the [On Off] key for more than 6 s, the drive unit changes
from operating mode „On“ respectively from the standby mode „Off“
to activated Motion Care function.
Modus
►
Display
Motion Care
function
more than 6 s
4.5
Starting/stopping the motor
►
To start the motor, press key [33 45] to select the last used platter
speed.
As long the motor accelerates or brakes, the target speed display flashes,
to indicate that the target speed has not been reached yet.
As soon as the drive unit reached the target speed, the speed is displayed
continuously.
►
Press [On Off] to stop the motor.
The drive unit changes to operating mode; the display shows „0“ (
➔
4.2).
4.6
Select speed
The drive unit provides 2 speeds.
The selection is made by pressing key [33 45].
Key [33 45] switches 2 speeds: For the first time it is pressed a speed of
33.33 rpm is set.
Pressing key [33 45] again sets the speed to 45.00 rpm. Each further actua-
tion of key [33 45] switches between the speeds 45,00 rpm and 33.33 rpm.