User manual
Drive unit DAE-01 CL
13
5.5.5 Max. operating time until alerts
The max. operating hours are set with the target values. If the actual
values reach or exceed the target values, a alert message appears on the
display (
➔
4.9).
Channel
Function
Variable
Range of
values
120
Timer Drive belt target
yes
0 - 9999
121
Timer Drive belt actual
no
Time
122
Timer Pickup target
yes
0 - 9999
123
Timer Pickup actual
no
Time
5.5.6 Display of operating duration of motor and drive unit
Channel
Function
Variable
Range of values
900
Operating time
(motor only)
no
Days
901
Operating time total
(incl. electronics)
no
Days
5.5.7 Reset
Channel 999 resets the operating parameters („Set“) to the factory set-
tings. This means
• the speeds are set for a 30 cm platter.
• the operating hour counters for pickup and drive belt and their maxi-
mum operating hours are reseted.
The recorded operating hours for motor and drive unit are not affected
by the reset.
Channel
Function
►
Display
999
Reset to
factory
settings
+
To perform a reset, please proceed as follows:
►
Press and hold the keys [33 45] and [On Off].
The following animation appears on the display:
The reset process can still be aborted by releasing keys [33 45] and [On
Off] during the running animation.
After a few seconds the display will show the following:
The reset has been performed, all parameters have been reset and stored.
►
Release keys [33 45] and [On Off].
