Avazzia, Inc.
9
1. Insert
two
double
AA
batteries
into
the
battery
compartment
on
the
reverse side
of
your
Avazzia
Med
-
Sport
device.
2. Turn
on
the
device
using
on/off
slide
switch.
3. Your
Med
-
Sport
device
is
ready
for
use.
Getting Started
With the Med-Sport™
10
Med-Sport™ Device
1.
Power on/off slide switch: Slide the switch to turn the device on and off.
2.
Power Level Indicating LEDs: When device is turned on, power level is 1(lowest
power) and leftmost power intensity LED is lit and flashing slowly. While increasing
power levels, LEDs light up from left to right and blinks increasingly faster until lit.
This pattern repeats for each LED. When fifth LED stays lit, the highest power level is
set at 250.
3.
Mode Selection Indicating LEDs: The LED will blink with frequency of pulse emission
in Blue Stimulate and Relax modes. The LED will flash slowly in Modulate 4:1 and
Acute modes.
4.
Mode Selection Key: Depress the Mode Selection Switch to select the desired oper-
ating mode. Changing modes does not change the power level.
5.
Electrodes (on back of unit): Pulse is applied through the electrodes on the back of
the unit.
6.
Accessory Electrode Port: Insert electrode accessory lead wire into port. This will
discontinue the stimulation pulse from the built
-
in electrodes.
7.
Power Level Selection Keys: Press the keys to select the desired power level. Press
(+) to increase power. Press (–) to decrease power.
8.
Battery Compartment (on back of unit): Use good quality 1.5V AA batteries.
Overview
of
Med-Sport
operation:
Mode SELECT
Increase device
output strength
Decrease device
output strength
Med-Sport™ Device Overview Diagram
