6
Run the Embedded Web Manager (optional)
System Requirements
The minimum hardware and Operating System requirements are:
•
Pentium® II 400 Mhz-based computer with 128 Mb of RAM
•
Screen resolution of 1024 x 768 pixels
•
Microsoft® Internet Explorer® 5 or Netscape Navigator® 4.x
•
Windows® 95, NT® 4.0 (server/workstation) or Windows 2000 (server/workstation)
•
Sun Microsystems Java™ plug-in (supplied on the “Documentation and Utilities” CD)
L
Refer to the Release Notes for the exact version of the Java plug-in
Running the Embedded Web Manager
L
Assign an IP address to the Master Switch before starting this procedure.
L
Assign a primary management interface (pmi) to the X330W-2USP module. The default
pmi is the first interface you define.
1
Verify that there is communication between the Master Switch and the X330W-2USP using
the ping command to the pmi of the X330W-2USP. If there is no response, check the IP
address and default gateway of both the X330W-2USP and the Master Switch.
2
Open your browser.
3
Enter the URL of the switch in the form http://aaa.bbb.ccc.ddd
L
aaa.bbb.ccc.ddd is the IP address of the switch.
X
You are prompted to log into the switch.
L
The user name is root.
The default password for read-write access is root.
L
The Web management passwords are the same as those of the CLI. If you have created
additional CLI user names or changed the default passwords then you can use those
passwords for Web management as well.
X
The welcome page is displayed: