Avaya WLAN 8100 Series, Installation Manual

Page: 12 / 24

Radio frequency advisories
Federal Communications Commission (FCC) Docket 96-8 for Spread Spectrum Transmitters
specifies a safety standard for human exposure to radio frequency electromagnetic energy
emitted by FCC-certified equipment. The Avaya Access Point 8120 product meets the
uncontrolled environmental limits found in OET-65 and ANSI C95.1-1991, if proper installation
procedures are followed. To ensure compliance with these exposure requirements, you must
install this device in such a manner as to maintain a minimum of 20 cm separation distance
between the radiating elements and all persons.
Additional radio safety advisories
Warning:
Install this device in such a manner as to maintain a minimum of 20 cm (7.9 inches)
separation distance between the radiating elements and all persons. This safety warning
conforms with FCC radio frequency exposure limits.
Warning:
Do not operate the AP near unshielded blasting caps or in an otherwise explosive
environment unless the device has been modified for such use by qualified personnel.
Warning:
Do not touch or move the AP when the antennas are transmitting or receiving.
Warning:
Before using a wireless device in a hazardous location, consult the local codes, national
codes, and safety directors of the location for usage constraints.
Installation preparation
12 Avaya WLAN 8100 Installation–AP 8120 August 20, 2010