1-8
Introduction
VSU-7500 User Guide
The following information will help you plan an acceptable equipment rack
configuration.
•
Enclosed racks must have adequate ventilation. Ensure that the rack is not
overly congested because each unit generates heat. An enclosed rack should
have louvered sides and a fan to provide cooling air.
•
When mounting a chassis in an open rack, ensure that the rack frame does not
block the ventilation grates. If the chassis is installed on slides, check the
position of the chassis when it is seated all the way into the rack.
•
In an enclosed rack with a ventilation fan in the top, excessive heat generated
by equipment near the bottom of the rack can be drawn upward and into the
ventilation grates of the equipment above it in the rack. Ensure that you
provide adequate ventilation for equipment at the bottom of the rack.
Instructions for rack mounting are provided in the section “Rackmount
Installation” on page 2-2.
Summary of Contents for VSU 7500
Page 1: ...VSU 7500 VPNware Service Unit User Guide VPNet Technologies Inc ...
Page 19: ...Installing the VSU 7500 2 3 VSU 7500 User Guide Figure 2 2 Installing the Rackmount Brackets ...
Page 40: ...A 4 Specifications VSU 7500 User Guide ...
Page 42: ...B 2 10 100BASE T UTP Crossover Cable Pinouts VSU 7500 User Guide ...
