Avaya Tenovis Integral-55, Configuration Note, Page: 19 / 25

AVAYA E1/QSIG
19
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
3. Port Group Name = MWI
4. Max MWI Sessions = 1
5. Indicator On/Off signals must use same port = Leave Blank
6. MWI On Field = Leave as default (can't be changed)
7. MWI Off Field = Leave as default (can't be changed)
8. Select OK to save changes
ƒ
Next access the General tab within the PBX Type tab
1. Telephony Type = Dialogic QSIG
2. Under PBXs ensure Avaya G3 (Dialogic QSIG) is selected
3. Select OK to save changes
After making these changes, return to “Configuring the voicemail system” within
the Message Application Server Installation Guide. Ensure you are prompted to
restart the Message Application Server services to apply these changes.
Important: In order to make this integration work. The following Registry Keys
should be set in the MAS as shown below.
[HKEY_LOCAL_MACHINE\SOFTWARE\Octel\Geneva\Vcm_TelephonyServiceMgr\QSIG]
"CTLayer3PBX"=dword
:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Octel\Geneva]
“TUIDirectCallToDivert”=dword:
00000002
[HKEY_LOCAL_MACHINE\SOFTWARE\Octel\Geneva\Vcm_TelephonyServiceMgr\QSIG]
"OperationOffset"=dword:
00000006
Registry Keys must be
set as shown here.
“Operation Offset”
establishes a proper
Layer 3 handler in MM
for integration to a
Tenovis PBX.