Avaya P334T, User Manual, Page: 116 / 182

Chapter 6 CLI – Layer 2
100 Avaya P334T User’s Guide
The syntax for this command is:
set port negotiation <mod_num>/<port_num> {enable|disable}
Output Example:
To disable autonegotiation on port 1, module 4:
P330-N# set port negotiation 4/1 disable
Link negotiation protocol disabled on port 4/1.
set port enable
Use the
set port enable
command to enable a port or a range of ports.
The syntax for this command is:
set port enable [mod_num/port_num]
Output Example:
To enable port 3 on module 2:
P330-N# set port enable 2/3
Port 2/3 enabled.
set port disable
Use the
set port disable
command to disable a port.
The syntax for this command is:
set port disable <mod_num>/<port_num>
Output Example:
P330-N# set port disable 5/10
Port 5/10 disabled.
mod _num The switch number
port_num The port number