Avaya P333R-LB, Installation And Configuration Manual

Page: 83 / 218

Chapter 11 Avaya P330 Layer 2 Features
Avaya P333R-LB User’s Guide 69
PBNAC CLI Commands
In order to... Use the following command...
Configure dot1x on a system set dot1x
Disable dot1x on all ports and
return to default values clear dot1x config
Display the system dot1x
capabilities, protocol version, and
timer values show dot1x
Display all the configurable values
associated with the authenticator
port access entity (PAE) and
backend authenticator show port dot1x
Display all the port dot1x statistics show port dot1x statistics
Set the minimal idle time between
authentication attempts set dot1x quiet-period
Set the time interval between
attempts to access the
Authenticated Station set dot1x tx-period
Set the server retransmission
timeout period for all ports set dot1x server-timeout
Set the authentication period (an
idle time between re-authentication
attempts) set dot1x re-authperiod
Set the authenticator-to-supplicant
retransmission timeout period (the
time for the switch to wait for a
reply from the Authenticated
Station) set dot1x supp-timeout
Set the max-req for all ports (the
maximal number of times the port
tries to retransmit requests to the
Authenticated Station before the
session is terminated) set dot1x max-req