Avaya P333R-LB, Installation And Configuration Manual

Page: 47 / 218

Chapter 6 Avaya P333R-LB Front and Back Panels
Avaya P333R-LB User’s Guide 33
Note: The Port LEDs of the are numbered from . Expansion Module ports are
numbered from 51. Port LED numbers 49-50 are reserved.
FC Flow Control
OFF – No Flow Control
ON – Symmetric/Asymmetric Flow Control
mode is
enabled and port is in full duplex
mode.
Hspd High Speed 10/100 1000
OFF: 10 N/A
ON: 100 1000
LAG
Link Aggregation
Group (Trunking)
OFF – No LAG defined for this port
ON – Port belongs to a LAG
Table 6.2 Avaya P330 <- -> Select buttons
Description Function
Left/Right Individual – select LED function (see table above).
Reset module Press both right and left buttons together for approximately two
seconds. All LEDs on module light up until buttons are
released.
Reset stack Press both right and left buttons together for 4 seconds. All
LEDs on stack light up until buttons are released.
FIV Not in use.
Table 6.1 Avaya LED Descriptions
LED Name Description LED Status