
2-8
OR-II Getting Started Guide
Install the OR-II - Connect the Network Interfaces
Connect the Network Interfaces
2
1. Insert your Avaya Wireless LAN PC Card(s) into the processor module.
One PC Card slot of the Avaya Wireless LAN OR-II is equipped with a
plastic Slot Protector Card. The purpose of this card is to protect the
OR-II unit from dust when it is used with a single Avaya Wireless LAN
PC Card only. Only when you intend to install two Avaya Wireless LAN
PC Cards, take out the Slot Protector Card. You are advised to keep the
Slot Protector Card for situations when you would like to change the
OR-II hardware configuration in the future.
Figure 2-5
Inserting Avaya Wireless LAN PC Card
2. Connect your Ethernet cable to the 10/100Base-T Ethernet interface.
Use tie-wraps to secure the Ethernet cable to the small loops on the
mounting plate at the position where the cable will leave the unit.