NEC 2400
Confidential
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
3
4.0 SUPPORTED INTEGRATION FEATURES
• System forwarding to personal greeting
- ring-no-answer
• Station forwarding to personal greeting
- busy
- ring-no-answer
- all calls
• Message-waiting
notification
- lights (
refer to section 8.7
)
- LCD display (if available)
- Stutter dial tone (
refer to section 8.8)
• Multiple return-to-operator
• Automated attendant
• Outcalling
• Direct
call
• Personal greeting of original-called party on multiple-call forward
5.0 CONFIGURING THE NEC 2400 DATA LINK
o
Each PBX can support up to four I/O-02 cards. Each I/O-02 card
supports two I/O ports. Locate an available I/O port that will be
used for the voice mail data link. Assign it as an MCI port through
the ASYD command, SYS1 Index 29.
See Section 8.5
o
Verify the guard timer is set to zero for the MCI port, through the
ASYD
command.
o
Locate the 6 sets of dip switches on the card. The switches are
identified as SW0, SW01, SW02, SW11, SW12, and SW13.
o
Switch SW0 tells the PBX which I/O card (of four) it is. Verify that
the switches are set according to
Figure 1
for the voice mail port.
Card Number SW0 Settings:
1
2
3
4
0
off
off
off
off
1
off
on
off
off
2
on
off
off
off
3
on
on
off
off
Figure 1.
o
Port 1 on a given I/O-02 card is controlled by switches SW01 and
SW02. Port 2 is controlled by switches SW11 and SW12. All four
switches have 8 settings each.
Supported integration features
Configuring the NEC 2400 data
link