background image

Norstar Mode M7310 Phone User Guide

Page 12

- Issue 4a (14 June 2012)

IP Office Basic Edition

·

Configure SSL VPN Service

From the System Administration menu, press # 775

Configure, enable, or disable SSL VPN tunnels.

·

VMS Mailbox Transfer

: Feature 986 

This function allows you to transfer your current call to another extension's mailbox. Your current call is put on hold
and you enter the target extension number to indicate the mailbox required. 

1.5 Status Letters

When the phone is idle, it normally displays the date, time. It may also shown you extension number and, in the bottom
left, some of the following status letters. 

·

B = Barred 
B is shown on your phone's display when the system administrator has set you to outgoing call barred status.
You will only be able to make internal calls while this is applied. 

·

D = Diverting (Forwarding) Calls 
D is shown on your phone's idle display when you have forward unconditional enabled. 

·

G = Group Member (In Group)
G is shown on your phone's idle display when have been configured as a member of a hunt group and your
membership is enabled. While this is the case, you may receive calls targeted to the hunt group. 

·

N = No Calls (Do Not Disturb) 
An N is shown on your phone's idle display when you have do not disturb enabled. 

·

T = Twinned 
T is shown on the phone's idle display if it is internally twinned with your phone. Calls to you will alert on both
phones and can be answered by you at either phone. 

·

S = System Alarm 
If you are configured as a system phone, an S in the phone's display indicates a system alarm.

43

21

Summary of Contents for M7324

















































Reviews: