Telephone Installation
Checking Telephones - Page 25
Connecting & Checking Two-Wire Telephones
All two-wire devices (POTS) should be tested according to the manufacturer's instructions
before connection to the Avaya IP Office - Small Office Edition system. Connect the two-
wire device and make a test call.
Power Fail Telephones and Sockets
The power fail sockets (see page 5) must be tested.
To test a power fail socket :
1. Locate the socket and check that it is clearly labeled as a power fail socket.
2. Connect a telephone to the socket.
3. With power to the Avaya IP Office - Small Office Edition system switched on, make a
test call.
4. Switch the power to the Avaya IP Office - Small Office Edition system off and again
make a test call.
5. Switch the power to the Avaya IP Office - Small Office Edition system back on again.
6. Repeat the test for any other power fail sockets.
Note:
Where E911 statuary requirements for discrete location identification of a
power fail phone are required on the transmitted CLI, ensure that the relevant
installation programming is completed.
IP Office - Small Office Edition Installation Manual
Telephone Installation - Page 25
40DHB0002UKED – Issue 2 (29th July 2004
Checking Telephones