Small Office Edition Installation Manual
Page 61
IP Office 3.0
40DHB0002UKED Issue 3 (4th February 2005)
SNMP
SNMP Functionality
The IP Office SNMP Agent implements SNMPv1 on a read-only basis for security reasons.
More
•
SNMP Agent Configuration
•
MIBs Supported
•
Trap Generation
•
MIB Loading
•
HP OpenView Network Node Manager 6.41 and Earlier
•
CastleRock SNMPc 5.1.6c and Earlier
SNMP Agent Configuration
The following operational items may be configured for the IP Office SNMP Agent using the IP Office
Manager:
SNMP Server:
•
Enable/disable
•
Enabled: the device to respond to SNMP requests and send traps for any associated
events that occur if so configured.
•
Disabled: the SNMP agent on the device does not respond to SNMP requests or send
traps.
•
UDP Port (default 161)
•
Changes the default port value of the SNMP Agent.
•
Read-only community
•
Community string of up to 32 alphanumeric characters for read-only access.
•
Two trap destinations:
•
IP Address
•
UDP Port (default 162)
•
Community string of up to 32 alphanumeric characters.
•
Event mask specifying the events the trap destination is interested in receiving
•
generic (coldStart, warmStart, linkDown, linkUp, authenticationFailure)
•
licence – License Key Server access fault notifications
•
phone change – connected phone change notification