Avaya IP Office 1400 Series User Manual Download Page 66

Page: 66 / 78

IP Office Basic Edition 1400 Series Phone User Guide

Page 66

- Issue 7a (30 January 2014)

IP Office Basic Edition

8.11 Default Handsfree Audio Path

By default, when you make a call or answer a call without lifting the handset, the audio is played through the phone's
speaker while you speak via the phone's microphone (not on 1403 phones).

If you have a headset attached, you can change the phone's behavior so the audio is played through the headset by
default rather than the speaker.

To set the default handsfree audio path: (1403/1408/1416)

1. Press the

MENU button.

2. Use the

up and down

arrow keys to locate the option Call Settings.... Press the Select soft key.

3. Use the

up and down

arrow keys to locate the option Audio Path.

4. Use the left and right arrow keys or press the Change soft key to change the setting.

5. When completed, press the Done soft key.

6. Press the Exit soft key to exit the menus.

Summary of Contents for IP Office 1400 Series















































































Search results

Summary of Contents for IP Office 1400 Series

Reviews:

Related manuals for IP Office 1400 Series

Brands by name

Popular brands

Avaya IP Office 1400 Series, User Manual

Search results

Summary of Contents for IP Office 1400 Series

Reviews:

Related manuals for IP Office 1400 Series

Brands by name

Popular brands