Avaya G450 Manager, Cli Reference Manual

Page: 683 / 1334

Policy - access control lists
Issue 1 January 2008 683
ip-option-in
Use the
ip-option-in
command to specify the action taken on packets carrying an IP option,
for the current access control list. Use the
no
form of the command to return to the default
treatment of IP option packets.
Syntax
ip-option-in action
no ip-option-in
Parameters
User Level
read-write
Context
ip access-control-list
Example
To specify that incoming packets with an IP option are permitted:
G450-001(ACL 330)# ip-option-in permit
Related Commands
cookie , ip-fragments-in , ip-rule (policy, policy-based routing, packet sniffing) , name , owner ,
show composite-operation , show isdn bri link , show list
ip-rule (policy, policy-based routing, packet sniffing)
Use the
ip-rule
command to enter configuration mode for the specified rule. If the specified
rule does not exist, the system creates it and enters its configuration mode.
Syntax
ip-rule
{
rule_index | default
}
Parameter Description Possible Values Default
Value
action
The action to take permit , deny , deny-notify,
deny-rst , deny-notify-rst