E1/T1 interfaces
Issue 1 January 2008
369
ds-mode
Use the
ds-mode
command to specify the mode of the controller.
Note:
Note:
When you change the ds-mode, you must copy the running configuration to the
startup configuration and reset the device.
Syntax
ds-mode {e1|t1}
Parameters
User Level
admin
Context
general
Example
To set the controller to operate in T1 mode:
G450-001(super)# ds-mode t1
To change ds-mode, copy the running configuration to the start-up configuration file, and reset
the device.
Related Commands
,
Parameter
Description
Possible
Values
Default
Value
e1
Keyword specifying to set the mode to E1
t1
Keyword specifying to set the mode to T1
Summary of Contents for G450 Manager
