VPN
Issue 1 January 2008
1217
Parameters
User Level
read-write
Context
crypto isakmp peer
Example
To specify the ISAKMP peer description as “New York office”:
G450-001(config-peer:135.64.102.109)# description "New York office"
Related Commands
initiate mode
Use the
initiate mode
command to specify which IKE Phase-1 mode to use when
communicating with the peer. Use the
no
form of this command to restore the default setting,
which is
main
mode.
Note:
Note:
Aggressive mode is one of the prerequisites for working with dynamic IP
addresses.
Syntax
[no] initiate mode {main | aggressive | none}
Parameter
Description
Possible
Values
Default
Value
desc
The description of the ISAKMP peer.
Note:
If you wish to include spaces in the
description, you must enclose the string
in quotation marks (“”).
string of
1-80
characters
Summary of Contents for G450 Manager
